Selecting Dialing Speeds; Figure 4-26.Dialing Speeds Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Selecting Dialing Speeds

150
Select one of the following two options:
Dial channels in parallel—All ISDN channels are dialed
simultaneously. This is the default setting.
Dial channels one a a time—Each ISDN channel is dialed after
the previous channels has connected. Use this option if your
network has problems dialing all the channels in parallel.
The Dialing Speeds lets you limit the choices that appear as speed
selections. Offering a minimum number of speeds is a way to lower
network traffic. The speeds that are selected in this screen will be
displayed as dialing speed selections in the Video Phone and in the
Address Book.
To access the Dialing Speeds screen:
Select System Info > Admin Setup > Video Network > IMUX >
Dialing Speeds.
Figure 4-26. Dialing Speeds Screen
The Nx56 and Nx64 columns list the dialing speeds available for
ISDN calls.
The IPx56 and IPx64 columns list the dialing speeds available for IP
calls.
www.polycom.com