Placing Multipoint Video Calls; Using The Manual Dialer (Video Phone); Table 6-3.Firewall Tcp/Udp Ports In Multipoint Calls - Polycom ViewStation FX4000 User Manual

Placing Multipoint Video Calls

Using the Manual Dialer (Video Phone)

© Polycom, Inc. 2002
To define ports:
Access the Firewall & LAN Connection screen by selecting
1.
System Info > Admin Setup > LAN/H.323 > LAN/Intranet >
Firewall/LAN Connection.
2. Select the option Use Fixed Ports.
Assign the correct number of fixed ports for your multipoint
3.
call. To obtain this information, refer to the table below.
Table 6-3. Firewall TCP/UDP Ports in Multipoint Calls
Number of Sites in
Call
2
3
4
There are several ways to place multipoint video calls:
Using the user interface's Manual Dialer (Video Phone). See
Using the Manual Dialer (Video
Using a multi-site local Address Book Meeting entry. See
an Address Book Meeting
Adding existing Address Book entries one at a time. See
the Address Book.
Using a combination of Manual Dialer and Address Book
entries. See Using the Manual Dialer and the Address
The following explains how to place a multipoint call manually by
adding sites to your videoconference.
Chapter 6 - Using Advanced System Features
TCP Ports
3230-3231
3230-3233
3230-3235
Phone).
Entry.
UDP Ports
3230-3235
3230-3241
3230-3247
Using
Using
Book.
219