Configure Ssh Access - Digi IX14 User Manual

Services
Configure SSH access
The IX14's default configuration has SSH access enabled, and allows SSH access to the device from
authorized users within the Internal firewall zone. If this configuration is sufficient for your needs, no
further configuration is required. See
information about configuring the SSH service to allow access from remote devices.
Required configuration items
Enable SSH access.
n
Configure access control for the SSH service.
n
Additional configuration items
Port to use for communications with the SSH service.
n
Multicast DNS (mDNS) support.
n
A private key to use for communications with the SSH service.
n
Create custom SSH configuration settings.
n
See Set the idle timeout for IX14 users
service.
Enable or disable the SSH service
The SSH service is enabled by default. To disable the service, or enable it if it has been disabled:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX14 User Guide
Allow remote access for web administration and SSH
for information about setting the inactivity timeout for the SSH
Configure SSH access
for
331