Parameter Setting - Mitsubishi Electric GOT SIMPLE Series Operation Manual

Parameter setting

Sets FX PLC parameters.
Parameters that can be changed and change targets
■Parameters that can be changed
The parameters that can be changed with the MELSEC-FX list editor and the target FX PLCs are as follows.
: Can be set/changed : Cannot be set/changed
Item
Memory space setting
File register space setting
Latch range setting
RUN terminal setting
Initialization of parameters
*1 When connecting an FX0(S), set "0". Setting other than "0" causes a parameter error.
*2 When the parameters are initialized, the display on the MELSEC-FX list editor is different from the FX PLC default values, but do not
change the latch range. Changing the latch range causes an error.
■Change targets
When a memory cassette is mounted, the parameters in the memory cassette are targeted for changes.
Operation
*1
Stop the FX PLC
Stop the FX PLC
*1 When checking parameters (not changing), it is not necessary to stop the PLC.
28 GOT SELF CHECK (DEBUG)
370
28.2 FX List Editor
Target CPU
FX0(S) FX1 FX2(C)
/FX0N
*1
*2
OP [Parameter setting]
*1
OP Select [Parameter setting] with
GO
FX1S FX1N(C) FX2N(C)
*2 *2
GO
or .
FX3S FX3G(C) FX3U(C)