Table of Contents
Advertisement
37.
"Analog channel stats cleared".
38.
"System reset issued".
39.
"4 chan Binary bd <#n> fail".
40.
"8 chan Binary bd <#n> fail".
41.
"Temperature bd <#n> fail".
42.
"Temp bd <#n> sensor <#n> fail".
43.
"4 ch A/D <#n> converter <#n> fail".
44.
"4 ch A/D <#n> EEPROM fail".
45.
Rectifier sequencing is enabled, disabled, or configured.
46.
Group <# n> configured.
47.
Set limits of analog or function channel.
48.
Set control program line of relay, LED, or function channel(s).
49.
Number of rings before answer is set.
50.
Alarm class <#n> is configured.
51.
Local communications port data rate is set.
52.
User mail is set.
53.
System alarm report parameters are configured.
54.
I/O card <#n> added.
55.
Search for new nodes ("NODE ADD" command).
56.
Node <#n> configured.
57.
Node <#n> or unmapped node deleted.
58.
Node <#n> replaced.
59.
I/O Network initialized.
60.
Upload abort before completion (partial upload).
61.
Upload of TL1 parameters failed.
62.
TL1 operating mode is configured.
63.
TL1 AID <#n> is configured.
64.
Channel database configured.
65.
One or more of the following IP (internet) parameter address was changed: Unit address, Gateway
address, Netmask address, Host address added, Host address deleted.
66.
SNMP operation was enabled or disabled.
67.
SNMP "GET", "SET" or "TRAPS" community string was changed.
68.
SNMP traps operation enabled, disabled, or version changed.
69.
SNMP traps host added or deleted.
70.
SNMP occurred, retired, or persistent traps enabled or disabled.
71.
Execution of the following TL1 commands results in an event log entry: ALW-MSG, INH-MSG, OPR-EXT-
CONT, RLS-EXT-CONT, INIT-SYS, DEL-USER, EDIT-PID, EDIT-USER, ENT-USER, SET-ATTR.
72.
Main chassis channel initialization failed.
73.
Power Metering Statistics cleared.
74.
Application Vx.x.x.x changed.
75.
HTTP create socket failed.
76.
HTTP task reset.
77.
HTTP bind socket failed.
78.
HTML checksum failure.
79.
VI parameters set.
80.
Battery Discharge Timer set.
81.
Key code nn validated.
82.
Invalid Key Code entered.
83.
System Alarm Report parameters set.
84.
Daily/weekly statistics cleared.
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
68
Advertisement
Table of Contents
