EDIT-PID
(ED-PID)
Referenced In: TR-NWT-000835, Issue 3, pg. 3-51
General Description: Edits the current user's privilege identifier (<pid>) parameter (i.e., LMS1000 user
password).
When executed, the command sets the PASSWORD attribute of the current user's LMS1000 user configuration
to the specified new name.
An entry is made in the LMS1000's event log indicating this command was executed by the current sessions
user. The event description indicates that the user changed his/her own password.
Related Commands: None
LMS1000 Access Level: 1
LMS1000 Equivalent: None
LMS1000 Input Format Variations:
<aid>
The access identifier (<aid>) parameter is the same value as the user identifier (<uid>) parameter for the current
user. The user identifier parameter is the NAME attribute for this user's LMS1000 user configuration. Invalid
values received for this parameter return an error response with the error code IIAC.
<oldpid>
This is the old privilege identifier (LMS1000 password) being replaced by a new one. This parameter is the
current PASSWORD attribute of the current user's LMS1000 user configuration. Invalid values received for this
parameter return an error response with the error code IDNV.
<newpid>
This is the new privilege identifier (LMS1000 password) which replaces the current one. This parameter is the
new PASSWORD attribute for the current user's LMS1000 user configuration. The LMS1000 allows a maximum
of eight characters for a password. At least two characters must be non-alpha, and at least one character must
be a symbol. (Valid symbols are the '#', '%', and '+' characters.) Invalid values received for this parameter return
an error response with the error code IDNV. If the entered value for this parameter matches an existing
privilege identifier for another user, an error response with the error code PIUI is returned.
LMS1000 Response Format Variations: None
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
460