SET NETSURE SYSTEM MODE
Description: Toggles the VPS/NPS operating mode (float output voltage or test/equalize output voltage).
Command Level: 6
Syntax:
SET NETSURE SYSTEM MODE
SE N SY MODE
Comments: The current operating mode is displayed, followed by a prompt to change the operating mode.
Notes: None
Related Commands: none
Example:
Command<6>: SET N SYSTEM MODE
System Mode: Float
System Mode (Float or TestEq):
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
393