SNMP ON
Description: Enable SNMP access.
Command Level: 6
Syntax:
SNMP ON
Comments: This command enables all access to the unit via SNMP. The unit responds to SNMP requests and
will permit a TRAP be sent.
Notes: Enables access to the system through the Ethernet port via an SNMP browser. Access to the system
can be disabled by issuing the local command SNMP OFF.
Related Commands:
SNMP
SNMP GET
SNMP OFF
SNMP SET
Example:
Command<6> : SNMP ON
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
439