Table of Contents
Advertisement
SET CMD
Description: Permits configuration of one of the eight programmable commands.
Command Level: 6
Syntax:
SET CMD [n]
SE CM [n]
Comments: Each command can consist of up to eight standard commands. When the command SET CMD is
entered, the system prompts for the number of the programmable command the user wishes to configure. The
system then prompts the user to enter the commands which will comprise the programmable command as well
as the name of the programmable command. The name is then used at the system prompt to execute these
standard commands that are a part of the programmable command. When the name of the programmable
command is entered, all of the commands listed in the group are automatically performed, without having to
manually prompt the system to perform each task.
Notes: Any commands entered as part of the programmable command will not be executed if the logged on
user does not have a high enough level of access. The use of the programmable command is similar in concept
to batch processing or macros.
Related Commands: CMD
Example:
Command<6>: SET CMD
1.
2.
3.
4.
5.
6.
7.
8.
Which command (1 - 8) ? 1
Command 1 name:
Command 1 name: ANALOG
Command 1 access level: 1
Command 1 access level:
Command 1 line 1:
Command 1 line 1: SCAN A
Command 1 line 2:
Command 1 line 2: STATS A
Command 1 line 3:
Command 1 line 3:
Command 1 line 4:
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
270
Advertisement
Table of Contents
