Table of Contents
Advertisement
TRAPS VERSION
Description: Change the version of SNMP TRAPS sent by the system.
User Access Level: 5
Syntax:
TRAPS VERSION <V1 | V2>
Comments: This tells the system whether V1 formatted or V2c traps will be created when a trap is sent.
Notes: The system supports both Version 1 and Version 2c traps.
Related Commands:
TRAPS
TRAPS ADD
TRAPS DELETE
`
TRAPS ON
TRAPS OFF
Example:
Command<6> : TRAPS VERSION V1
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
450
Advertisement
Table of Contents
