Table of Contents
Advertisement
UPLOAD
Description: Allows transfer of configuration information to the system from any personal computer capable of
uploading and downloading a file to a disk using XMODEM protocol with CRC error checking.
Command Level: 5, "User Configuration" data is only downloaded if the access level of the User is level '6'.
Syntax:
UPLOAD
UP
Comments: The UPLOAD command expects to receive information that is from a DOWNLOAD command.
Before using the upload command it is recommended that the defaults first be set (SET DEFAULTS).
Notes: The personal computer must be equipped with a communications software package which allows
saving of information and transfer of information to a floppy disk, hard disk, or RAM. The software package
must also be capable of uploading information from the personal computer to another device, such as the
system. Refer to the communications software package instruction manual for specific operating information.
Related Commands: DOWNLOAD
Example:
Command<6>: UPLOAD
UPLOAD using XMODEM Protocol with CRC error checking
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
413
Advertisement
Table of Contents
