TRAPS RETIRED
Description: Disable/Enable the system's ability to send SNMP Retired Alarm TRAPS.
Command Level: 5
Syntax:
TRAPS RETIRED OFF
TRAPS RETIRED ON
Comments: This enables the system to send or disables the system from sending Retired Alarms TRAPS. If
Retired Alarms traps are disabled, no Retired Alarms will be sent under any circumstances.
Notes: If TRAPS are disabled altogether via the TRAPS OFF command, Retired Alarms TRAPS will not be sent
regardless of the setting of the Retired Alarms TRAPS.
Related Commands:
TRAPS
TRAPS ON
TRAPS OFF
Example:
Command<6> : TRAPS RETIRED OFF
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
449