Vertiv NetSure LMS1000 User Manual page 419

USERS
Description: Lists each user and associated configuration information.
Command Level: 6
Syntax:
USERS
USERS n
US
US n
Comments: none
Notes: When the command is entered with a command modifier, the active/inactive state for that user is
shown. When the command is entered with no command modifier, inactive users are also listed along with the
configurations of all active users.
Related Commands: Set Users
Example:
C
ommand<6>: USER 8
USER NO. 8 CONFIGURATION – User is:
Name: User #8
Password: 8
Access Level: 6
Callback: No
Mechanized Interface: No
Report Mode: Off
Report Device: Modem
Report Retry Time: 15m
Primary Phone:
Primary E-mail:
Primary Phone Valid Days: 1-7
Primary Phone Valid Hours: 00-23
Alternate Phone:
Alternate E-mail:
USER NO. 8 CHANNELS: None
___________________________________________________________________________________
Command<6>: USER
. . .
USER NO. 2 CONFIGURATION – User is:
Name: User #2
Password: 2
Access Level: 2
Callback: No
Mechanized Interface: No
Report Mode: Off
Report Device: Modem
Report Retry Time: 15m
Primary Phone:
Primary E-mail:
Primary Phone Valid Days: 1-7
Primary Phone Valid Hours: 00-23
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
inactive
Occurred Alarm Report: No
Retired Alarm Report: No
Persistent Alarm Report: No
Persistent Alarm Report Period: 0m
Daily Report: No
Daily Report Command:
Daily Report Time:
active
Occurred Alarm Report: No
Retired Alarm Report: No
Persistent Alarm Report: No
Persistent Alarm Report Period: 0m
Daily Report: No
Daily Report Command:
Daily Report Time:
419