TRAPS COMMUNITY
Description: Set the SNMP TRAPS community name.
Command Level: 6
Syntax:
TRAPS COMMUNITY [community name]
Comments: Enter the community name. The TRAPS community name provides a simple means of
authentication for all SNMP TRAPS received.
Notes: The string may not contain more than 128 characters. SNMP TRAPS are sent using this string as their
community name.
Related Commands:
TRAPS ADD
TRAPS DELETE
TRAPS ON
TRAPS OFF
TRAPS VERSION
TRAPS OCCURRED
TRAPS RETIRED
TRAPS PERSISTENT
Example:
Command<6> : TRAPS COMMUNITY public
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
443