Vertiv NetSure LMS1000 User Manual page 259

Chan Description
A9022 NETSURE Total Battery Current
A9010 NETSURE Shunt05 Current
A9011 NETSURE Shunt06 Current
B9020 Battery Charge Alarm
B9113 Recharge Current Limit Inhibit
NETSURE MCA STATUS AS OF xx:xx:xx ON xx/xx/xx.
Description
Board Fail
Shelf fuse
A/D No System Voltage Input
A/D No Sense Lead Voltage Input
A/D No Subsystem Voltage Input
Display Fail
NETSURE LVD STATUS AS OF xx:xx:xx ON xx/xx/xx.
Description
LVD 1A
LVD 1B
LVD 2A
LVD 2B
LVD 3A
LVD 3B
The following is displayed only for active potentiometer controlled LVDs:
[LVD 3A]
[LVD 3B]
[LVD 4A]
[LVD 4B]
___________________________________________________________________________________
Command<1>: SCAN N SYSTEM
NETSURE SYSTEM STATUS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description
A9001 NETSURE System Voltage
A9002 NETSURE System Current
A9006 NETSURE Shunt01 Current
A9007 NETSURE Shunt02 Current
A9010 NETSURE Shunt05 Current
A9011 NETSURE Shunt06 Current
A9107 NETSURE Temperature Probe
A9111 NETSURE Temperature Probe
A9114 NETSURE Temperature Probe
B9009 NETSURE PCU Emergency Stop
B9024 NETSURE PCU High AC Line
B9010 NETSURE System Fuse
B9011 NETSURE All AC Off
B9014 NETSURE LVDs Inhibited
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
Value Units Alarm Status
30.00 Amps
20.00 Amps none
10.00 Amps none
none
none
Alarm Status
active
active
active
active
active
active
Alarm Status
[inhibited/failed/active/inactive]
[inhibited/failed/active/inactive]
[inhibited/failed/active/inactive]
[inhibited/failed/active/inactive]
[inhibited/failed/active/inactive]
[inhibited/failed/active/inactive]
[active]
[active]
[active]
[active]
Value Units Alarm Status
+50.3 VDC [None]
+800 Amps [None/Overcurrent]
+200 Amps [None/Fail]
+200 Amps [None/Fail]
+200 Amps [None/Fail]
+200 Amps [None/Fail]
1 -2.000 DEGC [none or failed(if not
communicating)]
5 10.00 DEGC none
8 19.00 DEGC none
[None/Active]
[None/Active]
[None/Active]
[None/Active]
[None/Active]
259