Table of Contents
Advertisement
This is the notification code parameter associated with a single alarm condition given in this block. Valid values
are the same as for the input format. Values are derived from the NOTIFICATION CODE attribute of the
LMS1000 channel or limit configuration with which the alarm condition is associated.
<almtype>
This is the alarm type parameter associated with the environmental alarm given in this block. Values are
derived from the CONDITION TYPE attribute of the LMS1000 channel or limit configuration with which the
alarm condition is associated.
<ocrdat>
This is the date when the triggering event occurred. The format for this parameter is MOY-DOM (Month-Of-
Year - Day-Of-Month). MOY ranges from 1 to 12, and DOM ranges from 1 to 31. A NULL value for this
parameter defaults to the current date unless <ocrtm> parameter is NULL, then this parameter does not apply.
<ocrtm>
This is the time when the triggering event occurred. The format for this parameter is HOD-MOH-SOM (Hour-
Of-Day - Minute-Of-Hour - Second-Of-Minute). HOD ranges from 0 to 23. MOH and SOM range from 0 to 59.
A NULL value means this parameter and the <ocrdat> parameter are not applicable.
<almmsg>
This parameter is not supported in LMS1000.
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
478
Advertisement
Table of Contents
