Table of Contents
Advertisement
IP GATEWAY
Description: Set the unit's gateway address.
Command Level: 6
Syntax:
IP GATEWAY [address]
Comments: Enter the address in the format nnn.nnn.nnn.nnn, where 0 ≤ nnn ≤ 255. This command sets the
address of the gateway of the network on which the unit resides.
Notes: The gateway address must be a valid IP address and must not be 255.255.255.255.
Related Commands:
IP
IP ADDRESS
IP DELETE
IP HOST
IP NETMASK
Example:
Command<6> : IP GATEWAY 216.32.74.1
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
429
Advertisement
Table of Contents
