Table of Contents
Advertisement
TL1 Commands Supported
RETRIEVE-ALARM
RTRV-ALM-{EQPT|ALL}
RETRIEVE-ALARM-ENVIRONMENT
RTRV-ALM-ENV
RETRIEVE-ATTRIBUTE
RTRV-ATTR-{EQPT|ALL}
RETRIEVE-ATTRIBUTE-ENVIRONMENT
RTRV-ATTR-ENV
RETRIEVE-CONDITION
RTRV-COND-{EQPT|ALL}
RETRIEVE-EXTERNAL-CONTROL
RTRV-EXT-CONT
RETRIEVE-HEADER
RTRV-HDR
RETRIEVE-LOG
RTRV-LOG
RETRIEVE-PERFORMANCE MONITORING
RTRV-PM-{EQPT|ALL}
RETRIEVE-THRESHOLD
RTRV-TH-{EQPT|ALL}
RETRIEVE-USER-SECURITY
RTRV-USER-SECU
SET-ATTRIBUTE
SET-ATTR-{EQPT}
SET-ATTRIBUTE-ENVIRONMENT
SET-ATTR-ENV
SET-SYSTEM_IDENTIFICATION
SET-SID
SET-THRESHOLD
SET-TH-{EQPT}
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
Description
Instructs the system to send the current state of its alarm conditions
associated with one or more equipment units, facilities, etc. within the
system.
Instructs the system to send the current state of its alarm conditions
associated with the system's environment.
Instructs the system to send the current notification code associated with
the specified events.
Instructs the system to send the current attributes associated with the
specified environmental alarm.
Instructs the system to send the current state and standing condition
(alarm or status) associated with one or more equipment units, facilities,
etc. within the system.
Instructs the system to retrieve the state of the specified relay channels
controlling external controls.
Requests that the system reply with a "normal" response indicating
COMPLD.
Instructs the system to retrieve the contents of an existing log.
Instructs the system to send its current set of Performance Monitoring
(PM) data associated with one or more equipment units, facilities, etc.
within the system.
Instructs the system to send the current threshold level (alarm limits) of
one or more monitored parameters for which violation will trigger an
automatic message.
Retrieves a user's security parameters. The calling identifier (<cid>)
parameter (i.e., user primary phone number), and user access privilege
(<uap>) parameter (i.e., user access level) of the specified user is
retrieved.
Instructs the system to set the current notification code associated with
the specified events.
Instructs the system to set the current attributes associated with the
specified environmental alarm.
Instructs the system to change its system identifier (SID) parameter to a
given value.
Instructs the system to set threshold levels (alarm limits) for a monitored
parameter that, when exceeded, will trigger an automatic message.
117
Advertisement
Table of Contents
