Table of Contents
Advertisement
5.
Remove the CPU circuit card by loosening the retaining screw.
6.
Make a note of the replacement CPU circuit card's neuron identifier number (written on the card). Slide
the replacement CPU circuit card into its mounting position, ensuring the rear edge connector is firmly
seated. Secure the circuit card by tightening the retaining screw located on the circuit card assembly.
7.
Remove the grounding wrist strap.
586505000/586505500 LMS1000 Cabinet: Close the shelf door and secure with the two captive
8.
fasteners (arrow on fastener points towards outside of cabinet).
or
582140000/582140001/582126100 Power System: Close the bay's front door.
9.
Reapply DC input power to the LMS1000 CPU circuit card.
10.
Log onto the system as a level 6 user.
11.
Enter the command NODE REPLACE. Enter the correct information for the node whose CPU is being
replaced and the new node CPU being installed.
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
529
Advertisement
Table of Contents
