Table of Contents
Advertisement
SNMP OFF
Description: Disable SNMP access.
Command Level: 6
Syntax:
SNMP OFF
Comments: This command disables all access to the unit via SNMP. The unit will not respond to a SNMP
request nor will any SNMP TRAP be sent.
Notes: Prevents access to the system through the Ethernet port via an SNMP browser. Access to the system
can be enabled by issuing the local command SNMP ON.
Related Commands:
SNMP
SNMP GET
SNMP ON
SNMP SET
Example:
Command<6> : SNMP OFF
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
438
Advertisement
Table of Contents
