Table of Contents
Advertisement
This parameter does not apply to LMS1000. The only valid value for this parameter is NULL. Invalid values for
this parameter return an error response with the error code IDNV.
<dirn>
This parameter does not apply to LMS1000. The only valid value for this parameter is NULL. Invalid values for
this parameter return an error response with the error code IDNV.
<tmper>
This parameter does not apply to LMS1000. The only valid value for this parameter is NULL. Invalid values for
this parameter return an error response with the error code INUP.
LMS1000 Response Format Variations:
<aidtype>
Valid values for an access identifier type response parameter are:
EQPT
equipment
COM
common
<ntfcncde>
This is the notification code parameter associated with a single alarm condition given in this block. Valid values
are the same as for the input format. Values are derived from the NOTIFICATION CODE attribute of the
LMS1000 channel or limit configuration with which the alarm condition is associated.
<condtype>
This is the condition type parameter associated with the alarm condition given in this block. Valid values are
the same as for the input format. Values are derived from the NOTIFICATION CODE attribute of the LMS1000
channel or limit configuration with which the alarm condition is associated.
<locn>, <dirn>, <tmper>
These parameters do not apply to LMS1000. A NULL value is inserted for them.
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
480
Advertisement
Table of Contents
