Table of Contents
Advertisement
This is the location of the threshold being set. This parameter specifies the threshold number (alarm limit
number) of the specified analog or function channel. Valid values for this parameter are LINE-x, where x is a
positive integer from one through four, which specifies the threshold number of the channel with which the
threshold is associated. This parameter is required in the input. Invalid values received for this parameter
return an error response with the error code IDNV.
<dirn>
This parameter does not apply to LMS1000. The only valid value for this parameter is NULL. Invalid values
received for this parameter return an error response with the error code IDNV.
<tmper>
This parameter does not apply to LMS1000. The only valid value for this parameter is NULL. Invalid values
received for this parameter return an error response with the error code IDNV.
LMS1000 Response Format Variations: None
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
502
Advertisement
Table of Contents
