Vertiv NetSure LMS1000 User Manual page 411

TIMEOUT
Description: Lists the length of time that the system will remain on-line without a command, carriage return, or
line feed being entered.
Command Level: 2
Syntax:
TIMEOUT
TIMEO
Comments: At the end of the time interval, the system will terminate the communications session.
Notes: none
Related Commands: SET TIMEOUT
Example:
Command<2>: TIMEOUT
User timeout: 300 seconds.
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
411