Table of Contents
Advertisement
These parameters do not apply to LMS1000. A NULL value is inserted for them when the <tmper> parameter
has a value other than NULL.
<tmper>
This is the accumulation time period for Performance Monitoring (PM) parameters. The format for this
parameter is VAL-UN, where valid values for VAL (value) and UN (unit) are:
VAL (value)
UN (unit)
1
DAY (day)
1 to 24
HR (hour)
1 to 1440
MIN (minute)
A value of NULL for this parameter defaults to 1-HR. A time period of 1-HR is used for hour averages, and a
time period of 1-MIN is used to indicate maximum and minimum peaks.
<mondat>
This is the date of the beginning of the Performance Monitoring (PM) period. The format for this parameter is
MOY-DOM (Month-Of-Year - Day-Of-Month). MOY ranges from 1 to 12, and DOM ranges from 1 to 31.
<montm>
This is the beginning of the time of day of the Performance Monitoring (PM) period. The format for this
parameter is HOD-MOH (Hour-Of-Day - Minute-Of-Hour). HOD ranges from 0 to 23. MOH and SOM range
from 0 to 59.
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
492
Advertisement
Table of Contents
