Vertiv NetSure LMS1000 User Manual page 508

REPORT ALARM ENVIRONMENT
(REPT ALM ENV)
Referenced In: TR-NWT-000833, Issue 5, pg. 5-13
General Description: Generated by an LMS1000 to report the occurrence of environmental alarms.
Related Commands: RETRIEVE-ALARM ENVIRONMENT
Related Messages: None
LMS1000 Equivalent: None
LMS1000 Message Format Variations:
<ntfcncde>
This is the notification code parameter associated with the environmental alarm conditions being reported.
Valid values for this parameter are as follows:
CR critical alarm
MJ major alarm
MN minor alarm
CL cleared alarm
Values are derived from the NOTIFICATION CODE attribute of the LMS1000 channel or limit configuration with
which the alarm condition is associated. Parameter grouping cannot be used with this parameter.
<almtype>
This is the alarm type parameter of environmental alarm(s) to be reported. Values are derived from the
CONDITION TYPE attribute of the LMS1000 channel or limit configuration with which the alarm condition is
associated. Parameter grouping cannot be used with this parameter.
<ocrdat>
This is the date when the triggering event occurred (i.e., the threshold was crossed). The format for this
parameter is MOY-DOM (Month-Of-Year - Day-Of-Month). MOY ranges from 1 to 12, and DOM ranges from 1 to
31. A NULL value for this parameter defaults to the date in the message header. Parameter grouping cannot
be used with this parameter.
<ocrtm>
This is the time when the triggering event occurred. The format for this parameter is HOD-MOH-SOM (Hour-
Of-Day - Minute-Of-Hour - Second-Of-Minute). HOD ranges from 0 to 23. MOH and SOM range from 0 to 59.
A NULL value for this parameter defaults to the time in the message header. Parameter grouping cannot be
used with this parameter.
<almmsg>
This parameter is not implemented in LMS1000. A NULL value is inserted for this parameter.
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
508