Table of Contents
Advertisement
VAL (value)
UN (unit)
1
DAY (day)
1 to 24
HR (hour)
1 to 1440
MIN (minute)
<conddescr>
This parameter is a text message which provides a detailed description of the alarm, event, or condition. It is an
ASCII string enclosed within a pair of escaped quotes (\"). It may also be used to describe any action to be
taken as a result of the condition. For this application, values are derived from the CONDITION DESCRIPTION
parameter of the LMS1000 channel or limit configuration with which the alarm condition is associated. If the
channel or limit parameter has not been configured, a NULL will be inserted for this parameter.
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
485
Advertisement
Table of Contents
