Table of Contents
Advertisement
RETRIEVE-ATTRIBUTE
(RTRV-ATTR-{EQPT|ALL})
Referenced In: TR-NWT-000833, Issue 5, pg. 4-223
General Description: Instructs LMS1000 to send the current notification code associated with the specified
events.
Related Commands: SET-ATTRIBUTE
LMS1000 Access Level: 2
An error response with the error code PICC is returned if this command is entered by a valid user whose level of
access is less than the access level of this command.
LMS1000 Equivalent: None
LMS1000 Input Format Variations: The command code modifier COM is not supported.
The <aid>, <ntfcncde>, and <condtype> parameters should not all be specified as non-null values.
<aid>
Specifying a value of ALL for the access identifier (<aid>) parameter requests retrieval of attributes conditions
for all access identifiers of the type defined by the command code modifier. Use of the command code modifier
ALL results in retrieval of all attributes for the LMS1000. If the command code modifier is ALL, the value of the
access identifier must be ALL. A NULL value is not permitted for this parameter. Invalid values received for
this parameter return an error response with the error code IIAC.
<ntfcncde>
Specifies the notification code parameter associated with the alarm conditions being retrieved. This parameter
is an attribute of the LMS1000 channel or limit configuration.
Valid values for this parameter are as follows:
CR
critical alarm
MJ
major alarm
MN
minor alarm
NA
not alarmed
NR
not reported
NULL
request retrieval of alarm conditions for all of the above codes
Invalid values for this parameter return an error response with the error code IDNV.
<condtype>
Specifies the condition type parameter associated with the attributes to be retrieved. Specifying a NULL value
causes all attributes to be retrieved which match the other bounding parameters. This parameter is an
attribute of the LMS1000 channel or limit configuration. Invalid values for this parameter return an error
response with the error code IDNV.
<locn>
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
479
Advertisement
Table of Contents
