Table of Contents
Advertisement
TRAPS PERSISTENT
Description: Disable/Enable the system's ability to send SNMP Persistent Alarm TRAPS or set the Persistent
Alarms reporting interval.
Command Level: 5
Syntax:
TRAPS PERSISTENT OFF
TRAPS PERSISTENT ON
TRAPS PERSISTENT {period}
Comments: This enables the system to send or disables the system from sending Persistent Alarms TRAPS. If
Persistent Alarms traps are disabled, no Persistent Alarms will be sent under any circumstances.
{period} must be in the range
1 ≤ {period} ≤ 1440
where period represents the number of minutes between successive traps for a given channel.
Notes: If TRAPS are disabled altogether via the TRAPS OFF command, Persistent Alarms TRAPS will not be
sent regardless of the setting of the Persistent Alarms TRAPS.
The system default Persistent Alarm period is 20 minutes.
Related Commands:
TRAPS
TRAPS ON
TRAPS OFF
Example:
Command<6> : TRAPS PERSISTENT OFF
___________________________________________________________________________________
Command<6> : TRAPS PERSISTENT 20
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
448
Advertisement
Table of Contents
