Table of Contents
Advertisement
INITIALIZE-LOG
(INIT-LOG)
Referenced In: TA-NWT-000200, Issue 5, pg. 132
General Description: Instructs LMS1000 to initialize (i.e., clear) the specified log (alarm or event).
When this command is executed, it clears the contents of the existing log.
An entry is made in the LMS1000's event log indicating this command was executed by the current sessions
user. The event description indicates that the specified log was cleared.
Related Commands: None
LMS1000 Access Level: 6
An error response with the error code PICC is returned if this command is entered by a valid user whose level of
access is less than the access level of this command.
LMS1000 Equivalent: CLR LOG, CLR EVENTS
LMS1000 Input Format Variations:
<aid>
The access identifier (<aid>) parameter does not apply. The only valid value for this parameter is NULL. Invalid
values received for this parameter return an error response with the error code IIAC.
<lognm>
This is the name of the log. Valid values for this parameter are the text strings ALARM and ACTIV. The string
ALARM specifies clearing the LMS1000's alarm log, and the string ACTIV specifies clearing the LMS1000's
event log. Invalid values received for this parameter return an error response with the error code IDNV.
<stadat>
This parameter is not implemented in LMS1000, and must be the value NULL. Null specifies a default value of
the current date. Invalid values received for this parameter return an error response with the error code INUP.
<statm>
This parameter is not implemented in LMS1000, and must be the value NULL. Null specifies a default value of
the current time. Invalid values received for this parameter return an error response with the error code INUP.
LMS1000 Response Format Variations: None
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
466
Advertisement
Table of Contents
