Table of Contents
Advertisement
SET NETSURE SYSTEM TSTEQTIME
Description: Sets the "timed equalize feature's equalize time period" value.
Command Level: 6
Syntax:
SET NETSURE SYSTEM TSTEQTIME
SE N SY TSTEQT
Comments: The current value is displayed, followed by a prompt to enter a new value.
Notes: The following message is displayed if the setting was not accepted by the MCA:
Power system did not accept the new value, setting remains unchanged.
Related Commands: none
Example:
Command<6>: SET NETSURE SYSTEM TSTEQTIME
Test/Equalize Timeout: 1 hours
Test/Equalize Timeout:
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
400
Advertisement
Table of Contents
