Vertiv NetSure LMS1000 User Manual page 131

B9017 NETSURE Shunt Fail
B9018 NETSURE LVD Fail
B9020 NETSURE Battery Charge Alarm
B9024 NETSURE PCU High AC Line
B9025 NETSURE PCU01 Fail
...
B9080 NETSURE PCU56 Fail
___________________________________________________________________________________
Command<1>: ALARMS N MCA
MCA ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx.
Description
Board Fail
Shelf fuse
A/D No System Voltage Input
A/D No Sense Lead Voltage Input
A/D No Subsystem Voltage Input
Display Fail
___________________________________________________________________________________
Command<1>: ALARMS N SHUNT
SHUNT ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx
Description
Shunt01
Shunt02
Shunt03
Shunt04
Shunt05
...
Shunt16
___________________________________________________________________________________
Command<1>: ALARMS N LVD
LVD ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx.
Description
LVD 1A
LVD 1B
LVD 2A
LVD 2B
LVD 3A
LVD 3B
The following is displayed only for active potentiometer controlled LVDs:
[LVD 3A]
[LVD 3B]
[LVD 4A]
[LVD 4B]
___________________________________________________________________________________
Command<1>: ALARMS N PCU[n]
Which PCU (1-56)?
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
active
active
active
active
active
active
Alarm Status
active
active
active
active
active
active
Alarm Status
[type fail/com fail]
[type fail/com fail]
[type fail/com fail]
[type fail/com fail]
[type fail/com fail]
[type fail/com fail]
Alarm Status
[inhibited/failed/active]
[inhibited/failed/active]
[inhibited/failed/active]
[inhibited/failed/active]
[inhibited/failed/active]
[inhibited/failed/active]
[active]
[active]
[active]
[active]
131