Vertiv NetSure LMS1000 User Manual page 491

This is the accumulation time period for the Performance Monitoring (PM) information. This parameter is not
supported by LMS1000. The only valid value for this parameter is NULL. A NULL value causes the parameter
to default to 1-HR. Invalid values received for this parameter return an error response with the error code INUP.
<mondat>
This parameter is not supported by LMS1000. The only valid value for this parameter is ALL. Invalid values
received for this parameter return an error response with the error code IDNV.
<montm>
This parameter is not supported by LMS1000. The only valid value for this parameter is ALL. Invalid values
received for this parameter return an error response with the error code IDNV.
LMS1000 Response Format Variations:
<aid>
The access identifier parameter identifies the equipment unit to which the retrieved monitored parameter value
pertains.
<aidtype>
Valid values for an access identifier type response parameter are:
EQPT equipment
<montype>
This is the monitor type parameter for a retrieved performance monitoring value. Values are derived from the
MONITOR TYPE attribute of the LMS1000 analog or function channel configuration. This parameter may
contain a suffix to designate the type of performance monitoring value being retrieved. The suffix is separated
from the MONITOR TYPE by a hyphen, and takes the form C or F to indicate maximum or minimum types
respectively.
Example: DCVOLT-C
<monval>
This is the monitor value format parameter for a retrieved performance monitoring value. Values are derived
from the MONITOR TYPE attribute of the LMS1000 analog or function channel configuration.
<vldty>
This is the validity indicator for historical monitoring information. It indicates whether the information for the
specified time period was accumulated for the entire period, or only a portion of it.
Valid values for this parameter are:
COMPLData accumulated over entire time period
A value of NULL for this parameter defaults to COMPL.
<locn>, <dirn>
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
491