Vertiv NetSure LMS1000 User Manual page 129

The following is displayed if an invalid PCU number is entered.
Command<2>: ALARMS N PCU[n]
Which PCU (1-56)?
Invalid PCU number
Subsystem alarms are only displayed if a subsystem is installed.
Related Commands: ALARMS
Example:
Command<1>: ALARMS V
NETSURE SYSTEM ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description
B9001 NETSURE System High Voltage 1
B9002 NETSURE System High Voltage 2
B9003 NETSURE System Batt. on Disch.
B9004 NETSURE System 50% Batt. Disch.
B9005 NETSURE System Overcurrent
B9009 NETSURE PCU Emergency Stop
B9010 NETSURE System Fuse
B9011 NETSURE All AC Off
B9012 NETSURE MCA Fail
B9013 NETSURE LVD Active
B9014 NETSURE LVDs Inhibited
B9015 NETSURE System Major
B9016 NETSURE System Minor
B9017 NETSURE Shunt Fail
B9018 NETSURE LVD Fail
B9020 NETSURE Battery Charge Alarm
B9024 NETSURE PCU High AC Line
B9025 NETSURE PCU01 Fail
...
B9080 NETSURE PCU56 Fail
NETSURE SUBSYSTEM ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description
B9006 NETSURE Subsystem High Voltage
B9007 NETSURE Subsystem Low Voltage
B9008 NETSURE Subsystem Overcurrent
B9021 NETSURE Subsystem Fuse
B9022 NETSURE Subsystem Major
B9023 NETSURE Subsystem Minor
The following is displayed when a subsystem is not installed:
NETSURE SUBSYSTEM ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description
No Subsystem Installed
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
Alarm Status / Class
active
active
active
active
active
active
active
active
active
active
active
active
active
active
active
active
active
active
active
Alarm Status / Class
active
active
active
active
active
active
Alarm Status / Class
129