Table of Contents
Advertisement
OPERATE-ALARM CUTOFF
(OPR-ACO-{EQPT|ALL})
Referenced In: TR-NWT-000833, Issue 5, pg. 4-149
General Description: Cuts off the office audible alarm indications without changing the local alarm indications.
Only alarms which are currently active at the time the command is received are affected. LMS1000 remains
capable of transmitting its current alarm and status conditions.
This command functions in the same manner as LMS1000 command SET ACO, with one exception. If the
command modifier EQPT is used, only those channels with an access identifier type of "EQPT" are affected by
the alarm cutoff function.
An entry is made in the LMS1000's event log indicating this command was executed by the current sessions
user. The event description indicates that the alarm cutoff feature was operated for the specified access
identifier.
Related Commands: None
LMS1000 Access Level: 4
An error response with the error code PICC is returned if this command is entered by a valid user whose level of
access is less than the access level of this command.
LMS1000 Equivalent: SET ACO
LMS1000 Input Format Variations: The command code modifier COM is not supported.
<aid>
Specifying a value of ALL for the access identifier (<aid>) parameter initializes all registers for all access
identifiers of the type defined by the command code modifier. The value of the access identifier parameter
must be ALL. A NULL value is not permitted for this parameter. Invalid values received for this parameter
return an error response with the error code IIAC.
LMS1000 Response Format Variation: None
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
471
Advertisement
Table of Contents
