Table of Contents
Advertisement
EDIT-DATE_AND_TIME
(ED-DAT)
Referenced In: TA-NWT-000199, Issue 6, Supplement 1, pg. 3-18
General Description: Changes the LMS1000's system date and/or time.
An entry is made in the LMS1000's event log indicating this command was executed by the current sessions
user. The event description indicates that the date and/or time was set through the TL1 interface.
Delayed activation is not allowed.
Related Commands: None
LMS1000 Access Level: 3
An error response with the error code PICC is returned if this command is entered by a valid user whose level of
access is less than the access level of this command.
LMS1000 Equivalent: none
LMS1000 Input Format Variations:
<aid>
The access identifier (<aid>) parameter does not apply. The only valid value for this parameter is NULL. Invalid
values received for this parameter return an error response with the error code IIAC.
<date>
This is the value for the new date in the format YY-MM-DD.
YY
last two digits of year from 00 to 99
MM
month of the year ranging from 01 to 12
DD
day of the month ranging from 01 to 31
Invalid values for this parameter return an error response with the error code IDNV.
<time>
This is the value for the new time in the format HH-MM-SS.
HH
hour of the day in twenty-four hour format (00 to 23)
MM
minutes of the hour from 00 to 59
SS
seconds of the minute from 00 to 59
Invalid values for this parameter return an error response with the error code IDNV.
LMS1000 Response Format Variations: None
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
459
Advertisement
Table of Contents
