Table of Contents
Advertisement
error code SROF. If the user being activated is already active, then an error response is returned using the error
code PIUI. Other invalid values return an error response with the error code IIAC.
<pid>
The privilege identifier (<pid>) parameter determines the new privilege identifier which replaces the current
one. This parameter is the new PASSWORD attribute for the specified user's LMS1000 user configuration. The
LMS1000 allows a maximum of eight characters for a password. At least two characters must be non-alpha,
and at least one character must be a symbol. (Valid symbols are the '#', '%', and '+' characters.) Invalid values
received for this parameter return an error response with the error code IDNV. If the entered value for this
parameter matches an existing privilege identifier for another user, an error response with the error code PIUI is
returned.
<cid>
The calling identifier (<cid>) parameter determines the new calling identifier which replaces the current one.
This parameter is the new PRIMARY PHONE attribute for the specified user's LMS1000 user configuration. It
can either be the network address or the phone number of the specified user. Invalid values received for this
parameter return an error response with the error code IDNV.
<uap>
The user access privilege (<uap>) parameter determines the new user access privilege which replaces the
current one. This parameter is the new ACCESS LEVEL attribute for the specified user's LMS1000 user
configuration. Invalid values received for this parameter return an error response with the error code PIUC.
<keyword-defined block>
This parameter has no relevance in LMS1000, and is ignored if included.
LMS1000 Response Format Variations: None
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
464
Advertisement
Table of Contents
