Vertiv NetSure LMS1000 User Manual page 447

TRAPS ON
Description: Enable the system to send SNMP TRAPS.
Command Level: 5
Syntax: TRAPS ON
Comments: This enables the system to generate a TRAP when required. If traps are enabled, all traps are sent
to the configured hosts.
Notes: none
Related Commands: TRAPS
TRAPS ADD
TRAPS DELETE
TRAPS OFF
TRAPS VERSION
Example:
Command<6> : TRAPS ON
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
447