Vertiv NetSure LMS1000 User Manual page 510

Values are derived from the SERVICE EFFECT CODE attribute of the LMS1000 channel or limit configuration
with which the alarm condition is associated. Parameter grouping cannot be used with this parameter.
<ocrdat>
This is the date when the triggering event occurred (i.e., the threshold was crossed). The format for this
parameter is MOY-DOM (Month-Of-Year - Day-Of-Month). MOY ranges from 1 to 12 and DOM ranges from 1 to
31. A null value for this parameter defaults to the current date unless <ocrtm> is null, then this parameter does
not apply. Parameter grouping cannot be used with this parameter.
<ocrtm>
This is the time when the triggering event occurred. The format for this parameter is HOD-MOH-SOM (Hour-
Of-Day - Minute-Of-Hour - Second-Of-Minute). HOD ranges from 0 to 23. MOH and SOM range from 0 to 59.
A NULL value means this parameter and the <ocrdat> parameter are not applicable. Parameter grouping
cannot be used with this parameter.
<locn>, <dirn>
These parameters do not apply to LMS1000. A NULL value is inserted for them.
<tmper>
This is the accumulation time period for Performance Monitoring (PM) parameters. It represents the length of
time the alarm condition has been active. Parameter grouping cannot be used with this parameter. The format
for this parameter is VAL-UN, where valid values for VAL (value) and UN (unit) are:
VAL (value) UN (unit)
1 DAY (day)
1 to 24 HR (hour)
1 to 1440 MIN (minute)
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
510