Vertiv NetSure LMS1000 User Manual page 166

Condition Description
THIS VOLTAGE IS TOO HIGH
60.00H HVA1
Condition Description
THIS VOLTAGE IS HIGH
50.00L LVA1
Condition Description
THIS VOLTAGE IS LOW
40.00L LVA2
Condition Description
THIS VOLTAGE IS TOO LOW
Channel active (Y or N): Y
Name: Function Channel 1
Name:
Sub-access Identifier: FUNCTION1
Sub-access Identifier:
System Alarm Report mode: Y
System Alarm Report mode (Y or N):
Monitor type: DCVOLTS
Monitor type: DCAMPS
Monitor Value Format: Decimal
Set monitor value format to integer(I) or decimal(D): I
Limit 1 Enabled: Yes
Limit 1 Enabled (Y or N):
Limit 1 Value: 70.00
Limit 1 Value: 5000
Limit 1 Type: H
Limit 1 Type is High or Low (H or L):
Limit 1 Name: HVA2
Limit 1 Name: ABOVE 5000
Limit 1 Notification Code: MJ
Limit 1 Notification Code:
Limit 1 Service Effect Code: SA
Limit 1 Service Effect Code:
Limit 1 Alarm Class Number: 1
Condition Type: TOOHIGH
Condition Type:
Limit 1 Condition Description:
THIS VOLTAGE IS TOO HIGH
Condition Description:
THIS CURRENT IS TOO HIGH
Limit 2 Enabled: Yes
Limit 2 Enabled (Y or N):
Limit 2 Value: 60.00
Limit 2 Value: 4200
Limit 2 Type: H
Limit 2 Type is High or Low (H or L):
Limit 2 Name: HVA1
Limit 2 Name: ABOVE 4200
Limit 2 Notification Code: MJ
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
MAJOR HIGH
MINOR LOW
MINOR TOOLOW
MJ SA
MN NSA
MN NSA
166