Table of Contents
Advertisement
UPLOAD NPS
Description: Allows transfer of configuration information to the NPS from any personal computer capable of
uploading and downloading a file to a disk using XMODEM protocol with CRC error checking.
Command Level: 5, "User Configuration" data is only downloaded if the access level of the User is level '6'.
Syntax:
UPLOAD NPS
UP N
Comments: The UPLOAD NPS command expects to receive information that is from a DOWNLOAD NPS
command.
Notes: The personal computer must be equipped with a communications software package which allows
saving of information and transfer of information to a floppy disk, hard disk, or RAM. The software package
must also be capable of uploading information from the personal computer to another device, such as the NPS.
Refer to the communications software package instruction manual for specific operating information. This
command requires a communication program which supports XMODEM and CRC checking.
Related Commands: DOWNLOAD NPS
Example:
Command<6>: UPLOAD NPS
Upload NPS Power System Custom Message Text Blocks (Y or N)?n
UPLOAD using XMODEM Protocol with CRC error checking
9 blocks received OK.
Upload complete.
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
417
Advertisement
Table of Contents
