Vertiv NetSure LMS1000 User Manual page 387

SET NETSURE SYSTEM FACTORYCAL
Description: Resets the VPS/NPS "system voltage" calibration to the factory default value.
Command Level: 6
Syntax: SET NETSURE SYSTEM FACTORYCAL
SE N SY FACTORY
Comments: None
Notes: None
Related Commands: none
Example:
Command<6>: SET N SYSTEM FACTORYCAL
System calibrate voltage set to Factory default setting.
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
387