Table of Contents
Advertisement
Command<6>: SET N PCU
What PCU setting:
FANSPEED
LOADSHARE
?
Command<6>: SET N MESSAGE
Which custom message:
PCU
MCA
?PCU
Which PCU(1-56)?
SET NETSURE INTERFACE
Description:
Enables or disables the VPS/NPS Interface.
Command Level:
6
Syntax:
SET NETSURE INTERFACE
SE N IN
Comments:
none
Notes:
none
Related Commands:
none
Example:
Command<6>: SET N INTERFACE
Netsure Power System interface is ACTIVE
Do you wish to deactivate Netsure Power System interface (Y or N): y
Currently communicating to Netsure MCA, cannot disable interface.
Netsure Power System interface is ACTIVE
___________________________________________________________________________________
Command<6>: SET N INTERFACE
Netsure Power System interface is ACTIVE
Do you wish to deactivate Netsure Power System interface (Y or N): y
Netsure Power System is DISABLED
___________________________________________________________________________________
Command<6>: SET N INTERFACE
Netsure Power System interface is DISABLED
Do you wish to activate Netsure Power System interface (Y or N): y
Netsure Power System interface is ACTIVE
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
STATE
TOTALSLOTS
356
Advertisement
Table of Contents
