Table of Contents
Advertisement
RELEASE-EXTERNAL-CONTROL
(RLS-EXT-CONT)
Referenced In: TR-NWT-000833, Issue 5, pg. 4-179
General Description: Instructs LMS1000 to de-activate a specified relay channel to release an external
control.
The external control can be released either momentarily or continuously.
An entry is made in the LMS1000's event log indicating this command was executed by the current sessions
user.
Related Commands: OPERATE-EXTERNAL-CONTROL, RETRIEVE-EXTERNAL-CONTROL
LMS1000 Access Level: 5
An error response with the error code PICC is returned if this command is entered by a valid user whose level of
access is less than the access level of this command.
LMS1000 Equivalent: CLR RLY
LMS1000 Input Format Variations:
<aid>
Specifying a value of ALL for the access identifier (<aid>) parameter requests the de-activation of all LMS1000
relay channels specified by the control type (<conttype>) parameter. A NULL value is not permitted for this
parameter. Invalid values received for this parameter return an error response with the error code IIAC.
<conttype>
The control type (<conttype>) parameter is an attribute of the LMS1000 relay channel configuration. A NULL
value requests de-activation of all LMS1000 relay channels identified by the access identifier (<aid>) parameter.
When the access identifier (<aid>) parameter is ALL, the control type (<conttype>) parameter should not be
NULL. Invalid values received for this parameter return an error response with the error code IDNV.
<dur>
This is the duration for which the external control is to be released. Parameter grouping cannot be used with
this parameter.
Valid values for the <dur> parameter are as follows:
CONTSContinuous
LMS1000 does not support the value of MNTRY for this parameter. If the value MNTRY is received, an error
response with the error code INUP is returned. Other invalid values received for this parameter return an error
response with the error code IDNV. A NULL value for this parameter defaults to the value of CONTS.
LMS1000 Response Format Variations: None
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
473
Advertisement
Table of Contents
