Vertiv NetSure LMS1000 User Manual page 258

A9010 NETSURE Shunt05 Current
A9011 NETSURE Shunt06 Current
A9107 NETSURE Temperature Probe
A9111 NETSURE Temperature Probe
A9114 NETSURE Temperature Probe
B9009 NETSURE PCU Emergency Stop
B9024 NETSURE PCU High AC Line
B9010 NETSURE System Fuse
B9011 NETSURE All AC Off
B9014 NETSURE LVDs Inhibited
B9015 NETSURE System Major
B9016 NETSURE System Minor
B9106 NETSURE PCU Major
B9107 NETSURE PCU Minor
B9108 NETSURE PCU HVS
B9109 NETSURE PCU Load Imbalance
B9110 NETSURE Remote Equalize
B9111 NETSURE Remote HVS
B9112 NETSURE Remote ESTOP
B9114 NETSURE Sense Voltage Error
B9019 Temperature Probe Fail
B9115 NETSURE Audible Relay
NETSURE SUBSYSTEM STATUS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description
A9003 NETSURE Subsystem Voltage +50.9
A9004 NETSURE Subsystem Current +400
A9008 NETSURE Shunt03
A9009 NETSURE Shunt04
B9021 NETSURE Subsystem Fuse
B9022 NETSURE Subsystem Major
B9023 NETSURE Subsystem Minor
NETSURE PCU STATUS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description
A9005 Total PCU Current
A9026 PCU01 Current
A9027 PCU02 Current
A9030 PCU05 Current
A9031 PCU06 Current
A9034 PCU09 Current
A9037 PCU12 Current
A9045 PCU20 Current
The following is displayed only if Battery Shunt PODs installed:
NETSURE BATTERY STATUS AS OF 08:25:10 ON 05/04/06.
Vertiv™ | NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
+200 Amps [None/Fail]
+200 Amps [None/Fail]
1 -2.000 DEGC [none or failed(if not
communicating), High Temp, Low
Temp]
5 10.00 DEGC none
8 19.00 DEGC none
[None/Active]
[None/Active]
[None/Active]
[None/Active]
[None/Active]
[None/Active]
[None/Active]
none
none
none
none
none
none
none
none
none
none
Value Units Alarm Status
VDC [None]
Amps [None/Overcurrent]
+200 Amps [None/Fail]
+200 Amps [None/Fail]
[None/Active]
[None/Active]
[None/Active]
Value Units Alarm Status
+1200 Amps
+100 Amps [None/Fail]
+100 Amps [None/Fail]
+100 Amps [None/Fail]
+100 Amps [None/Fail]
+100 Amps [None/Fail]
+100 Amps [None/Fail]
+100 Amps [None/Fail]
258