Commands
IP
Description: Display information regarding the user configurable IP Network variables.
Command Level: 6
Syntax:
IP
Comments: This command displays all the relevant IP information.
Notes: If the Network Address, Netmask, or Gateway Address is 0.0.0.0, the address will be displayed as
NONE. If there are no hosts on the access list, the command displays:
No host access list. Unrestricted access granted.
The authorized host list is the list of remote computers permitted to access the system via telnet, TFTP, or
SNMP. Hosts are identified on the list by their IP address. The list supports a maximum of 32 entries.
If there are no hosts on the list, access is granted to any computer attempting to connect to the system.
Related Commands:
IP ADDRESS
IP DELETE
IP GATEWAY
IP HOST
IP NETMASK
Example:
Command<6> : IP
IP Network Address
IP Gateway Address
IP Netmask
Ethernet Address
IP Authorized Hosts : 216.32.74.42
Vertiv™
| NetSure™ LMS Data Processing Unit User Manual (Section 5847) | Rev. ZA
: 216.32.74.51
: 216.32.74.1
: 255.255.255.0
: 00:0C:0A:60:12:2C
216.32.74.43
426