Copyright-Info Enable - HP A7500 Series Command Reference Manual

add: Adds a specified offset to UTC time.
minus: Subtracts a specified offset to UTC time.
zone-offset: Sets the offset to UTC time, in the hh:mm:ss format, where the hh value ranges from 0 to 23,
the mm value ranges from 0 to 59, and the ss value ranges from 0 to 59. Zeros can be omitted, unless you
specify 00:00:00.
Description
Use the clock timezone command to set the local time zone.
Use the undo clock timezone command to restore the local time zone to the default UTC time zone.
By default, the local time zone is UTC zone.
To verify the setting, use the display clock command.
The timestamps in system messages are adjusted in reference to the time zone and daylight saving
schedule. Related commands: display clock, clock datetime, clock summer-time one-off, and clock
summer-time repeating.
Examples
# Set the local time zone to add five hours to UTC time.
<Sysname> system-view
[Sysname] clock timezone z5 add 5

copyright-info enable

Syntax
copyright-info enable
undo copyright-info enable
View
System view
Default level
3: Manage level
Parameters
None
Description
Use the copyright-info enable command to enable displaying the copyright statement.
Use the undo copyright-info enable command to disable displaying the copyright statement.
By default, the system displays the copyright statement.
Examples
# Enable displaying the copyright statement.
<Sysname> system-view
[Sysname] copyright-info enable
When a Telnet user logs in, the following statement appears:
•
****************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
154
*