Configuring Synchronous Information Output - HP A3100-8 v2 EI Configuration Manual

To do...
Uploading
the
security
log file to
the SFTP
server

Configuring synchronous information output

With synchronous information output enabled, if a user's input is interrupted by system output such as log,
trap, or debugging information, then after the completion of system output the system will display a
command line prompt—a prompt in command editing mode, or a [Y/N] string in interaction mode—
and the input so far.
The advantage of this feature is that when your input is interrupted by a large amount of system output,
you can continue your operations from where you were stopped.
Move a specified file
from a storage medium
to the recycle bin
Remove a folder
Format a storage
medium
Restore a file from the
recycle bin
Establish an SFTP
connection in an IPv4
network environment
Establish an SFTP
connection in an IPv6
network environment
Upload a file on the
client to the remote SFTP
server
Download a file from a
remote SFTP server and
save it
All other operations
supported by the device
acting as an SFTP client
Use the command...
delete [ /unreserved ] file-url
rmdir directory
format device
undelete file-url
sftp server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128
| des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } |
prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128
| des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
sftp server [ port-number ]
[ vpn-instance vpn-instance-name ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128
| des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } |
prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128
| des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
put localfile [ remotefile ]
get remotefile [ localfile ]
See Security Configuration Guide.
168
Remarks
Optional
The sftp commands are
available in user view; the other
commands are available in SFTP
client view.
For details of these commands,
see Security Command
Reference.