Display Bgp Routing-Table Vpnv4 Advertise-Info - HP FlexFabric 12500 Command Reference Manual

Table 24 Command output
Field
Relay Nexthop
Original nexthop
Ext-Community
Attribute value
State

display bgp routing-table vpnv4 advertise-info

Use display bgp routing-table vpnv4 advertise-info to display advertisement information for BGP VPNv4
routes.
Syntax
display bgp routing-table vpnv4 [ route-distinguisher route-distinguisher ] network-address [ mask |
mask-length ] advertise-info
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
route-distinguisher route-distinguisher: Specifies an RD, a string of 3 to 21 characters in one of these
formats:
16-bit AS number:32-bit user-defined number. For example, 101:3.
•
32-bit IP address:16-bit user-defined number. For example, 192.168.122.15:1.
•
• 32-bit AS number:16-bit user-defined number, where the minimum value of the AS number is 65536.
For example, 65536:1.
Description
Recursive next hop. If no recursive next hop is found,
this field displays not resolved.
Original next hop. If the route is learned from a BGP
update, it is the next hop in the update message.
Extended community attribute.
BGP route attribute information:
•
MED—MED attribute.
•
Localpref—Local preference.
•
pref-val—Preferred value.
•
pre—Protocol preference.
Route status:
•
valid—Valid route.
•
internal—Internal route.
•
external—External route.
•
local—Locally generated route.
•
synchronize—Synchronized route.
•
best—Best route.
67