Display Info-Center - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

mdc-admin
mdc-operator
Examples
# Display the diagnostic log file configuration.
<Sysname> display diagnostic-logfile summary
Diagnostic log file: Enabled.
Diagnostic log file size quota: 10 MB
Diagnostic log file directory: flash:/diagfile
Writing frequency: 24 hour 0 min 0 sec
Table 43 Command output
Field
Diagnostic log file
Diagnostic log file size quota
Log file directory
Writing frequency

display info-center

Use display info-center to display information center configuration information.
Syntax
display info-center
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display information center configuration.
<Sysname> display info-center
Information Center: Enabled
Console: Enabled
Monitor: Enabled
Log host: Enabled
IP address: 192.168.0.1, port number: 5000, host facility: local7
IP address: 192.168.0.2, port number: 5001, host facility: local5
Description
•
Enabled—Diagnostic logs can be output to the diagnostic log
file.
•
Disabled—Diagnostic logs cannot be output to the diagnostic
log file.
Maximum size of the diagnostic log file, in MB.
Directory where the diagnostic log file is saved.
Interval at which the system saves diagnostic logs from the buffer
to the diagnostic log file.
205