Help - 3Com 3CRWX120695A Command Reference Manual

help

WX4400# help
Commands:
-------------------------------------------------------------------------
clear
commit
copy
crypto
delete
dir
disable
display
exit
help
history
hit-sample-rate
load
logout
monitor
ping
quit
reset
rollback
save
set
telnet
traceroute
Displays a list of commands that can be used to configure and monitor
the WX switch.
Syntax —
help
Default — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — Use this command to see a list of available commands. If
you have restricted access, you see fewer commands than if you have
enabled access. To show a list of CLI commands available at the enabled
access level, type the following command at the enabled access level:
Clear, use 'clear help' for more information
Commit the content of the ACL table
Copy from filename (or url) to filename (or url)
Crypto, use 'crypto help' for more information
Delete url
Show list of files on flash device
Disable privileged mode
Display, use 'display help' for more information
Exit from the Admin session
Show this help screen
Show contents of history substitution buffer
Set NP hit-counter sample rate
Load, use 'load help' for more information
Exit from the Admin session
Monitor, use 'monitor help' for more information
Send echo packets to hosts
Exit from the Admin session
Reset, use 'reset help' for more information
Remove changes to the edited ACL table
Save the running configuration to persistent storage
Set, use 'set help' for more information
telnet IP address [server port]
Print the route packets take to network host
help 45